Section 9: Cost Estimation - DXF Drawings - 3D Analysis - Building Damage Assessment

SECTION 9: OPTIONAL MODULES: COST ESTIMATION, DXF DRAWINGS, 3D MODELS, HOLODEEPEX, BUILDING DAMAGE ASSESSMENT

DeepEX software implements a series of tools that can assist with the full project design. The basic version can design unlimited number of 2D design section with all construction stages, and it can do the full 2D design. With the DeepEX additional modules, we can create 3D models based on the 2D project design sections. DeepEX can do the full design of all structural items on the 3D plan. The total project cost can be estimated within DeepEX, allowing us to quickly evaluate several possible solutions. DeepEX can export all section and plan drawings to DXF files that can be accessed and modified by any CAD software. DeepEX can create a full 3D hologram of the model. This model can be opened by the HoloDeepEX software platform, and it is a great way to present the real project to the clients and check any possible construction issues. Finally, DeepEX can do full damage assessment of any building close to the excavation.

This section presents the use and capabilities of the mentioned additional optional modules of DeepEX.

9.1 Define Cost Estimation Options

9.2 Export Design Section Sketches to DXF

9.3 3D Frame Analysis Module

9.4 Create a Rectangular 3D Model in DeepEX

9.5 Edit Wall Perimeter Nodes – Create Actual Project Perimeter

9.6 Define Wall Sections of all Perimeter Walls

9.7 Create Bracing Levels on Walls

9.8 Edit Walers on a 3D Model – Assign Load Patterns from Design Sections

9.9 Edit Supports on a 3D Model

9.10 Add Supports on a 3D Model (Struts – Tiebacks – Waler-Strut Configurations)

9.11 Review 3D Frame Results